O Scale – Locomotive Kit 93063

These items are available as separate items or by the bag.   Please call us for prices.

from Kit #93063
Porter 15 Ton 0-4-0 Locomotive with Tender  from Kit #93063
Part# Description Qty
3063-01 complete bag #1 (includes the following)
3063-1 a.  frame
b.  front frame spacer
c.  equalizer bar
d.  retainer
e.  rear spacer bar
2
3063-2 fire box front 1
3063-3 a.  front pilot beam
b.  rear pilot beam
1
3063-4 a,b,c.  cinder clean-out pipe
d. mounting block
1
3063-5 a.  brake bracket
b.  brake shoe assembly
c.  brake cylinder
d.  brake cylinder cap
2
3063-02 complete bag #2 (includes the following)
3060-6 cab floor 1
3060-7 rear frame extensions (R,L) 1
3060-8 a.  fire box (upper right)
b.  fire box (upper left)
1
3060-9 a.  fire box (lower rear)
b.  ash pan (right
c.  ash pan (left)
d.  ash pan (rear)
e.  front pilot bracket (right)
f.  front pilot bracket (left)
1
3060-10 a.  ash pan bottom
b.  crosshead yoke
c.  water pipe connector
1
3060-51 a.  coupler pocket (upper)
b.  coupler pocket (lower)
c.  coupler pocket flange
d.  smoke box front nut retainer
2
3060-75 coupler 2
3063-04 complete bag #4  (includes the following)
3060-17 cylinder block 2
3060-18 a.  cylinders
b.  cylinder cap (rear)
c.  valve chest
d.  valve chest cover
e.  valve levers
2
3060-19 a.  cylinder block connecting flange
b.  valve stuffing box front
c.  valve stuffing box rear
d.  cylinder stuffing box
e.  sander pipe brackets
f.  builders plates
2
3060-20 a.  main rod
b.  side rod
c.  cross head guide
2
3060-21 a.  headlight bracket (front mount)
b.  whistle
c.  pop valves
d.  cross heads
e.  coupler pins
f,g,h.  hand-rail posts
i.  sander rod post
j.  main rod pivot pin
2
3060-22 a.  front pilot brace (right
b.  front pilot brace (left)
c.  valve reverse lever
d.  valve reverse spring rod
1
3060-68 1-1/2″ hex nuts 16
3060-58 valve stem 2
3060-59 blower pipe (.020 wire) 1
3060-60 reach rod 1
3060-61 injector delivery pipe 22
3063-05 complete bag #5  (includes the following)
3060-25 cab side (left) 1
3060-26 cab side (right) 1
3060-27 cab rear 1
3063-28 cab roof 1
3060-30 cab sub floor 1
3060-31 cab window frames, arm rest 4
3063-67 a.  cab front
b.  left cab hold-down block
1
3063-06 complete bag #6  (includes the following)
3060-32 boiler 1

3060-33

smoke box 1
3060-34 smoke box front 1
3060-35 rear boiler section 1
3060-36 back head, oil can shelf 1
3060-37 stack with base 1
3060-66 headlight 1
3060-67 number plate assortment 1
3063-07 complete bag #7  (includes the following)
3060-55 handrail wire (.020 x 4″) 3
3060-56 sander rods (.020 wire–preformed) 1
3060-57 lubricator pipe (.010 x 2″ wire) 1
3063-62 a.  steam dome
b.  steam dome locating ring
c.  sand dome
d.  tank filler cap
e.  tank cleanout plug
f.  headlight bracket top mount
1
1
2
2
2
1
3063-66 a.  sander pipe
b.  sander operating rod supports
4
3063-72 a.  5-1/2″ handrail post
b.  7-1/4″ handrail post
4
2
3063-73 a.  drawbar pocket cover
b.  drawbar pocket
1
3063-74 running boards, right and left 1
3063-76 apron 1
105 a.  bell bracket
b.  bell bracket base
c.  bell trunnion
d.  bell
1
3063-77 .032″ brass wire 2
3063-08 complete bag #8  (includes the following)
3060-40 c.  pilot step–front
d.  pilot step–rear
1
3060-43 headlight handle material 1
3060-44 front pickup (.005 x .040 x .7 long) 2
3060-45 rear pickup (.995 x .060 x 1.2 long) 2
3060-46 front assembly screw (2-56 x 5/8) 1
3060-47 2-56 hex nut 1
3060-48 #1 self-tapping screws 2
3060-49 grab irons 2
3060-50 valve lever spring 1
3060-69 a.  headlight front glass
b.  cab window material
1
3061 complete Cab Detail kit  (includes the following)
3061-01 a.  turret
b.  injector steam lines (lagged) and globe valves
c.  gauge stand
d.   steam gauge
e.  gauge lamp
1
3061-02 a.  injector body
b.  waste pipe
c.  delivery pipe
2
3061-03 a.  injector suction pipe (right)
b.  injector suction pipe (left)
c.  blower valve and pipe
1
3061-04 water glass and piping 1
3061-05 a. brake valve body and piping (lagged)
b.  valve handle
c.  Lunkenheimer lubricator
d.  globe valve
e.  waste and brake lines
1
3061-06 a.  Detroit lubricator body
b.  mounting bracket
c.  supply line globe valve
d.  steam valve handle
e.  sander operating rod handles
1
3061-07 a.  throttle quadrant
b.  throttle lever
c.  1 qt. pump oil can
d.  1-1/2 pt valve oil can
1
3061-08 a.  reverse lever with rear quadrant section
b.  front quadrant section
c.  operating rod
1
3061-09 valve handle assortment 18
3061-10 cab seats 1
3061-11 bell 1