|
Miscellaneous 1/4" Scale Detail Parts--Locomotives |
Parts List for Porter 18 Ton Locos from Kit #93060
These items are available as separate items or by the bag.
Please
call us for prices. |
|
Part # |
Description |
Qty |
| 3060-01 |
complete
bag #1 (includes the following) |
| 3060-1 |
frame |
2 |
| 3060-2 |
fire box front |
1 |
| 3060-3 |
a. front pilot beam
b. rear pilot beam |
1 |
| 3060-4 |
a. front frame crossmember
b. equalizer bar
c, d, e. cinder clean-out pipe
f. cylinder block
g. mounting block |
1 |
| 3060-5 |
a. brake bracket
b. brake shoe assembly
c. brake cylinder
d. brake cylinder cap |
2 |
|
3060-02 |
complete bag #2 (includes the
following) |
| 3060-6 |
cab floor |
1 |
| 3060-7 |
rear frame extensions (R,L) |
1 |
| 3060-8 |
a. fire box (upper right)
b. fire box (upper left) |
1 |
| 3060-9 |
a. fire box (lower rear)
b. ash pan (right
c. ash pan (left)
d. ash pan (rear)
e. front pilot bracket (right)
f. front pilot bracket (left) |
1 |
| 3060-10 |
a. ash pan bottom
b. crosshead yoke
c. water pipe connector |
1 |
| 3060-51 |
a. coupler pocket (upper)
b. coupler pocket (lower)
c. coupler pocket flange
d. smoke box front nut retainer |
2 |
| 3060-75 |
coupler |
2 |
|
3060-03 |
complete bag #3 (includes
the following) |
| 3060-11 |
drivers (front |
2 |
| 3060-12 |
drivers (rear) |
2 |
| 3060-13 |
geared axle |
1 |
| 3060-14 |
plain axle |
1 |
| 3060-15 |
journals |
4 |
| 3060-16 |
a. crank pin retainer (front)
b. crank pin retainer (rear)
c. crank pin rear spacer |
2 |
|
3060-04 |
complete bag #4
(includes the following) |
| 3060-17 |
cylinder block |
2 |
| 3060-18 |
a. cylinders
b. cylinder cap (rear)
c. valve chest
d. valve chest cover
e. valve levers |
2 |
| 3060-19 |
a. cylinder block connecting flange
b. valve stuffing box front
c. valve stuffing box rear
d. cylinder stuffing box
e. sander pipe brackets
f. builders plates |
2 |
| 3060-20 |
a. main rod
b. side rod
c. cross head guide |
2 |
| 3060-21 |
a. headlight bracket (front mount)
b. whistle
c. pop valves
d. cross heads
e. coupler pins
f,g,h. hand-rail posts
i. sander rod post
j. main rod pivot pin |
2 |
| 3060-22 |
a. front pilot brace (right
b. front pilot brace (left)
c. valve reverse lever
d. valve reverse spring rod |
1 |
| 3060-68 |
1-1/2" hex nuts |
16 |
| 3060-58 |
valve stem |
2 |
| 3060-59 |
blower pipe (.020 wire) |
1 |
| 3060-60 |
reach rod |
1 |
| 3060-61 |
injector delivery pipe |
22 |
|
3060-05 |
complete bag #5
(includes the following) |
| 3060-24 |
cab front |
1 |
| 3060-25 |
cab side (left) |
1 |
| 3060-26 |
cab side (right) |
1 |
| 3060-27 |
cab rear |
1 |
| 3060-28 |
cab roof |
1 |
| 3060-29 |
coal box |
1 |
| 3060-30 |
cab sub floor |
1 |
| 3060-31 |
cab window frames, arm rest |
4 |
|
3060-06 |
complete bag #6
(includes the following) |
| 3060-32 |
boiler |
1 |
|
3060-33 |
smoke box |
1 |
| 3060-34 |
smoke box front |
1 |
| 3060-35 |
rear boiler section |
1 |
| 3060-36 |
back head, oil can shelf |
1 |
| 3060-37 |
stack with base |
1 |
| 3060-66 |
headlight |
1 |
| 3060-67 |
number plate assortment |
1 |
|
3060-07 |
complete bag #7
(includes the following) |
| 3060-37 |
water tank body |
1 |
| 3060-38 |
water tank rear |
1 |
| 3060-39 |
water tank front |
1 |
| 3060-40 |
a. water tank bottom
b. running board
c. pilot step (front)
d. pilot (rear) |
1 |
| 3060-41 |
a. steam dome
b. sand dome covers
d. water hatch
e. water hatch cover |
1 |
| 3060-42 |
sander pipe |
4 |
| 3060-55 |
handrail wire (.020 x 4") |
3 |
| 3060-56 |
sander rods (.020 wire--preformed_ |
1 |
| 3060-57 |
lubricator pipe (.010 x 2" wire) |
1 |
| 3060-69 |
bell and bracket |
1 |
|
3060-08 |
complete bag #8
(includes the following) |
| 3060-43 |
headlight handle material |
1 |
| 3060-44 |
front pickup (.005 x .040 x .7 long) |
2 |
| 3060-45 |
rear pickup (.995 x .060 x 1.2 long) |
2 |
| 3060-46 |
front assembly screw (2-56 x 5/8) |
1 |
| 3060-47 |
2-56 hex nut |
1 |
| 3060-48 |
#1 self-tapping screws |
2 |
| 3060-49 |
grab irons |
2 |
| 3060-50 |
valve lever spring |
1 |
|
3061 |
complete Cab Detail kit
(includes the following) |
| 3061-01 |
a. turret
b. injector steam lines (lagged) and globe valves
c. gauge stand
d. steam gauge
e. gauge lamp |
1 |
| 3061-02 |
a. injector body
b. waste pipe
c. delivery pipe |
2 |
| 3061-03 |
a. injector suction pipe (right)
b. injector suction pipe (left)
c. blower valve and pipe |
1 |
| 3061-04 |
water glass and piping |
1 |
| 3061-05 |
a. brake valve body and piping (lagged)
b. valve handle
c. Lunkenheimer lubricator
d. globe valve
e. waste and brake lines |
1 |
| 3061-06 |
a. Detroit lubricator body
b. mounting bracket
c. supply line globe valve
d. steam valve handle
e. sander operating rod handles |
1 |
| 3061-07 |
a. trottle quadrant
b. throttle lever
c. 1 qt. pump oil can
d. 1-1/2 pt valve oil can |
1 |
| 3061-08 |
a. reverse lever with rear quadrant
section
b. front quadrant section
c. operating rod |
1 |
| 3061-09 |
valve handle assortment |
18 |
| 3061-10 |
cab seats |
1 |
| 3061-11 |
bell |
1 |
| |
|
|
GRANDT LINE PRODUCTS
