loco imgReturn to Model Railroading Home tank img Return to Military Home

Augmentables: misc. hardware and nuts and bolts

Turnbuckles

NOTE:  Measurements in inches are length of turnbuckle, followed by width

No.

Image

Scale

Description

Meas. (inches)

Qty

Price

54 glp0054 1/4" SCALE TURNBUCKLES-cored for .025" wire .200, .060 24 3.30
81054 same in brass 16 14.00
4019 glp4019 S TURNBUCKLES .180, .050 12 3.30
4042 same in brass 4 6.50
5039 glp5039 HO SCALE TURNBUCKLES .100, .040 24 3.30
86039 same, in brass 16 15.00

Hinges

NOTE:  Measurements in inches are length , followed by width

No.

Image

Scale

Description

Meas. (inches)

Qty

Price

3508
glp3508 1:48 HINGE ASST--LG
longest hinge (open triangular)
.50 x .100
smallest hinge (open triangular)
.250 x .075
2 sets 3.30
5095 glp5095 1:87 HINGE ASST--SM longest open hinge is .275" 2 sets 3.30
3553 glp3553 1:48 DOOR HINGES 1.335 x .06 48 3.50
3524 glp3524 1:48 STRAP HINGE--LG .935 x .05 48 3.50
5298 1:87 .570 x .035 48 3.30
5118 glp5118 1:87 STRAP HINGE--SM longest open hinge is .275" 2 sets 3.30

Lift Rings/Eyebolts and Rivets: Can be used in all scales

No. Image  Description Meas. (inches) Qty Price
108 glp108 LIFT RINGS AND EYEBOLTS center mount: .07"/.065"/.035" DIA.

side mount:
.065"/.035" DIA.
ASST 3.30
152 glp152 RIVETS- CONICAL HEAD .032" DIA. 175 3.30
155 .043" DIA. 175 3.30
157 .063" DIA. 100 3.30
153 glp153 RIVETS- ROUND HEAD .032" DIA. 175 3.30
154 .043" DIA.  175 3.30
156 .063" DIA. 100 3.30

Nuts and Bolts

glp001These are cast as shown in this sample.  Nuts/bolts are at the ends of the "teeth" of the comb.  To apply to your project, we suggest drilling an appropriate hole to match the "stem" of the bolt, trimming it off of the comb, and finally pressing the stem into your hole.  If cement is necessary, apply it from the inside.

NOTE:  Measurements in inches are across the flat of the nut
No. Image Scale Description Meas. (inches) Qty Price
1 glp0001drg 1/4" 1 1/4" SQUARE NUT, BOLT, WASHER    .026" 175 3.30
63 glp0063drg 1/4" 1/2" SQUARE NUT, BOLT, WASHER .010" 175 3.30
5045 HO 1" SQUARE NUT, BOLT, WASHER
9 glp0082drg 1/4" 1" SQUARE NUT, BOLT .021" 175 3.30
82 1/4" 2 1/2" SQUARE NUT-NO WASHER .052" 100 3.30
15 glp0127drg 1/4" 1 1/4" HEX NUT, BOLT  .026" 175 3.30
127 1/4" 1 1/2" HEX NUT, BOLT-NO WASHER .031" 100 3.30
5135 HO 2 3/4" HEX NUT, BOLT-NO WASHER
128 1/4" 2 1/2" HEX NUT, BOLT-NO WASHER .060" 100 3.30
18 glp0018drg 1/4" 2 1/2" NUT ON RECTANGULAR WASHER .052" 100 3.30
5113 HO  4 1/2" NUT ON RECTANGULAR WASHER
5094 glp0020drg HO 2 1/2” SQUARE NUT ON CARTER BROS.  ELLIPTICAL WASHER .029" 100 3.30
20 1/4" 2 1/2” SQUARE NUT ON CARTER BROS.  ELLIPTICAL WASHER .052" 20 3.30
44 glp0044drg 1/4" 2 1/8" SQUARE NUT, 5" RIBBED WASHER .044" 20 3.30
62 glp0023drg 1/4" 7/8" SQUARE NUT, BOLT, CAST IRON WASHER .018" 175 3.30
5046 HO 1 3/4" SQUARE NUT, BOLT, CAST IRON WASHER
23 1/4" 1 1/2" SQUARE NUT, BOLT, CAST IRON WASHERS .031" 100 3.30
5123 HO 2 1/2" SQUARE NUT, BOLT, CAST IRON WASHERS
16 1/4" 2 1/2" SQUARE NUT, BOLT, CAST IRON WASHER .052" 50 3.30
80 glp0080drg 1/4" 2 1/2" SQUARE NUT ON 6" SQUARE WASHER .052" 50 3.30
81 glp0081drg 1/4" 2 1/2" HEX NUT ON 6" SQUARE WASHER .052" 50 3.30
5096 HO 2 1/2" HEX NUT ON 6" SQUARE WASHER
5066 glp0093drg HO 1 1/4" NUT, 3" MALLEABLE WASHER .014" 175 3.30
93 1/4" 1 1/4" NUT, 3" MALLEABLE WASHER .026" 100 3.30
5093 HO 2-1/2" NUT, 5" MALLEABLE WASHER
100 glp0063drg 1/4" 7/8" NUT,1 3/8" STEEL WASHER, 1/2" BOLT .018" 175 3.30
5100 HO 1 3/4" NUT,1 2 1/2" STEEL WASHER
101 1/4" 1 1/6" NUT,1 3/4" STEEL WASHERS, 5/8" BOLT .022" 175 3.30
5101 HO 1 7/8" NUT,1 3/16" STEEL WASHERS
98 1/4" 1 1/2" NUT,2" STEEL WASHER,3/4" BOLT .026" 175 3.30
5098 HO 2 1/2" NUT,401/2" STEEL WASHER,
8 1/4" 1 1/4" SQUARE NUT, BOLT (1/2 of the casting sprue has the nut/bolt with a washer, 1/2 has no washer) .026" 175 3.30
99 1/4" 1 5/8" NUT, 2 1/2" STEEL WASHER,1" BOLT .034" 100 3.30
5099 HO 3" NUT, 4 1/2" STEEL WASHER
139 GLP0139DRG 1/4" 1 1/2" NUT WITH 4" CAST IRON WASHER-CORED FOR .020" WIRE .031" 80 3.30
5156 HO 2 1/2" NUT WITH 6 1/2" CAST IRON WASHER-CORED FOR .020" WIRE
162 glp0162drg 1/4" WING NUT ASSORTMENT
4 sizes:  lg (9 ea), med (9ea), small (12 ea), xsmall (12 ea)
lg:  .175"
med:  .135"
sm: .100"
xsm:  .060"
3 SETS 3.30
163 glp0163drg 1/4" STAR NUT, BOLT, WASHERS .075" 100 3.30
3911 glp3911drg 1/2" HEX NUT ON SQUARE, RIBBED CAST IRON WASHER:  .115" across the flat of the nut 24 4.00
3912 glp3912drg 1/2" HEX NUT ON ROUND,  CAST IRON WASHER .105" across the flat of the nut 30 4.00


up arrowgo to top